Painting HP's, Logic Woes

Today I sprayed on a third coat of paint onto the body skin panels and a first coat of aluminum paint onto the Holoprojectors.  Very happy with the results.

I'm having trouble getting the fiber optic strands to stay put in the templates.  The silicone idea didn't work out so I'll need to do a little brain scrubbing for a better idea.  Maybe you have one?

John

Logic Display Templates

Yesterday I finally made the Logic Templates, the little boards with holes cutout of them for the fiber optic strands to stick through.  I used a piece of Acrylic.  It has paper on each side to protect the surface since the surface is very smooth and glossy.  This worked to my advantage as the paper gave me a surface to easily draw the templates onto.

After cutting out each piece, I used my Dremel Drill Press to make the holes.  Here's some math for you.  the front logics are made up of 2 5x9 grids for 45 points of light each, or 90 all together.  The rear logic is one 4x27 grid for 108 points of light.  All together I drilled out 198 3/32" holes.  Lots of fun!

Now for the fun part.  Threading each little hole with a strand of fiber optic cable.  I tried to start it last night but as I went along some of them kept falling out.  To solve this, I'm going to try to secure a few at a time.  I'll start with the front logics since I already have the fiber optics cut for them.  I ordered more fiber for the rear logics which should arrive in a few days....I hope.

Started painting the last two body panels.  Also did an aluminum color test on a piece of styrene.  Want to make sure I get the desired results for the HP's.

Another Midwest Builders Gathering is coming on June 2nd.  I hope to have the logics and PSI's temporarily mounted for it plus having the Radar Eye mounted.  Also, Celebration VI only 4 months away!

John

Holes and Paint

Yesterday I accomplished drilling the holes for the PSI's and the Holographic Projectors (HP's), and started priming the HP's and the two remaining skin panels.

I'm using a different primer than before.  This time I decided to try using an automotive wet-sandable primer.  It's also very fast drying so I can sand and prime it after only 4 hours where before I had to wait 48 hours.  Today I'll give the parts one more layer of primer then when dry, a first coat of paint.

Other work I did yesterday was sand down the PSI LED caps to fit the inside curvature of the head.  To do this I taped 150 grit sandpaper inside the head and then started rubbing the PSI LED cap against it.  It took a while, but I finished both caps.  Then I cemented the PSI lenses to the caps.  The PSI lens material is from a gallon milk jug.  The MacGyver way to built a droid, hehe.

The resin Radar Eye was designed to fit an R2 shaped dome.  My R6 head, however, is shaped a little differently.  Do to this, I have to modify the Radar Eye to fit my R6 head's curvature using the same method I used for the PSI's.

I spent over an hour last night rubbing the Eye and it's close, but I realized I still need to fit the lens for the eye behind it.  Will be examining the fit of these pieces to ensure proper look and fit.  Work in progress.

More updates to come.  May not post them until next weekend.  Stay tuned.

John

Begin Head Detailing

Last night I took the wooden sticks off. Thankfully, the second layer stayed on and the edges didn't peel up. Below are the Front, Right Side, Back, Left Side and mounted pictures.

Later today I intend to take the head to my Dad's shop and drill out the PSI and HP holes. While I'm at it, I'm going to start painting the resin head parts I acquired years ago. In this picture are (left to right) 1 fixed-position holographic projector (will go on the back), 1 movable holographic projector (front, 3 pieces) and the iconic radar eye.

The lenses for the radar eye is a separate piece which I will install once the radar is modified to fit and painted.

The HP's will be painted aluminum and the radar eye painted white in keeping with my chosen color scheme. In addition, I might also tackle the skin panels. Two need to be redone and the rest need clear coated. The results of all this tonight or tomorrow morning.

 John

Face On

Second layer is glued on! The wooden sticks are being used as clamps along each panel line to ensure it lays flat. For glue I used the Gem-Tac again. I'll keep the clamps on for 2 or more days to ensure the styrene will stay on and lay right. Once The clamps come off, I can take the head back to my Dad's shop to drill out the PSI and Holoprojector holes. After that I need to cut out the side boxes. I'll wait on painting the head for when I get the top on and I can't do that until I install the fiber optics for the Logic Displays.

Cutting Out the Panels Update

Done! The panels are out! Observe....

Next step is sanding the front and back of the main piece and cutouts, then gluing the main piece onto the head. Maybe I'll do that tomorrow.

John

Cutting Out the Panels

Just started cutting out the panels for the head. Got three done so far. I'll continue working on this today, but I wanted to share the excitement as I do it. Another update soon.

Painters tape is sticky enough to hold the ruler and styrene down so they don't move but not sticky enough as to smudge the pencil lines.

Front Processor State Indicator panel is now loose.

Two more done, including the Front Logic Display panel.

John

Face-Off

At last. The moment we've all been waiting for. Well, maybe not THE moment, but one of them. These past few days I started drawing, measuring and cutting the second layer face piece for the head. Took me about 3-4 revisions before I got the spacing and everything right, but I did it. The panel layout is complete.

Using the same alignment method for cutting the pieces of styrene out, I measured and drew the panels. The main challenge was getting every detail spaced out to fit all the way around the head and be aligned where they need to be.

When I had finished the first attempt, I cutout the second layer and test fit it on the head. These pictures are of the final test.

Here's what it looks like when laid flat. For kicks, I positioned the resin Radar Eye I've had in storage since 2006 or 2007.

Next up is cutting out the panels. When I get the nerve.

John

Time Flys

I just noticed I haven't posted anything since January. Please pardon my absence. I've been busy getting up to speed with a new job I started in January.

Sadly I haven't done anything new since my last post. I'm planning to real soon. Just dealing with a lot of work and little money to spare.

Speaking of money, my "Funds for Celebration VI" progress is $0.00. Though I've been trying to save money since last August, stuff keeps happening requiring money. At this point it's not looking promising I'll be able to put aside enough money. But there is still a chance. As long as nothing happens within the next five months, I should be able to put aside just enough money for the trip. Fingers crossed.

Coming up soon (I hope): I still have two body skin panels to repaint plus painting the main skin panels themselves. Also finishing the head. Just one more main piece of styrene (plus the two top pieces), paint and lights and it's done.

Spring time is building time.

John

Second Layer Started

Today I glued on the second layer to the neck area. Used the painter's tape to hold it on.

I also rough-cut the second layer piece for the face. Once I take the tape off, I'll test fit it. I made it 1/8" wider so it would line up with the neck more seamlessly.
Still working on how to measure and cut out the panels. I decided to cut out the panels as separate pieces so I can try to line them up on the head and space them out before I cut into the second face layer.

John